Product ID:EPK 1077 PART A, AA1077
MSDS Date:09/29/1989
FSC:8040
NIIN:00N015062
MSDS Number: BKPRS

DEXTER HYSOL AEROSPACE INC DIV OF EXTER CORP

2850 WILLOW PASS ROAD
PITTSBURG, CA 94565-3237
US

Emergency Phone: 510-458-8000

Info Phone: 510-458-8000

Cage: 33564

DEXTER CORPORATION ADHESIVE & COATING SYSTEMS

312 BAY POINT, CA 94565-3299 US

Telephone: 202-483-7616

Cage: 33564

EPOXY RESIN SYSTEM

TALC (CONTAINING NO ASBESTOS)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: <30%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9192

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: <05%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE SKIN IRRITATION AND POSSIBLE
ALLERGIC REACTIONS. PROLONGED AND REPEATED CONTACT MAY CAUSE
SENSITIZATION WHICH WILL RESULT IN ALLERGIC REACTIONS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SKIN RASH, IRRITATION.
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:FLUSH SKIN AND EYE CONTACT WITH PLENTY OF WATER FOR AT LEAST
15 MINUTES. WASH SKIN THOROUGHLY WITH SOAP AND WATER, RUBBING
ALCOHOL OR HAND CLEANER. DO NOT USE SOLVENTS. REMOVE SOILED
CLOTHING AND WASH BEFORE REUSE. IF IRRITATION PERSISTS, SEE MD.
INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR. SUPPORT
BREATHING (GIVE O*2/ARTF RESP) .

Flash Point Method:COC
Flash Point:470F,243C
Extinguishing Media:DRY CHEMICAL OR HALON FIRE EXTINGUISHER, OR WATER
SPRAY, FOAM OR FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASES MAY BE
LIBERATED.

Spill Release Procedures:WEAR PROT CLTHG, GLOVES & SAFETY GLASSES.
SCRAPE UP & TRANSFER TO METAL CONTAINER. WIPE UP REMAINING RESIDUE
WITH SOLVENTS, OBSERVING SOLVENT FLAMMABILITY CAUTIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP COOL IN ACCORDANCE WITH LABEL
INSTRUCTIONS. STORE AT ROOM TEMPERATURE (77F) FOR 12 MONTHS.
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE.

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN . NOT NEEDED WITH GOOD INDUSTRIAL VENTILATION.
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
CNDTNS (POLYM): BE BONDED. FAILURE TO OBSERVE CAUTION MAY RESULT IN
EXCESSIVE HEAT BUILD-UP WITH THE RELEASE OF TOXIC GASES.

HCC:N1
Boiling Pt:B.P. Text:DECOMPOSES
Vapor Pres:<0.01 MM
Vapor Density:>1
Spec Gravity:1.6
Evaporation Rate & Reference:<1
Solubility in Water:NIL
Appearance and Odor:LIGHT BLUE PASTE, MILD SWEET ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:CO, NO*X, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIXING RESIN & CURING AGENT IN
BATCHES >1 LB TOTAL. DO NOT HEAT MIXED ADHESIVE UNLESS CURING SURF
TO (SUPP DATA)

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.